Pen drive show empty even when data exists

         This is a different situation that you might experience in your daily life. The Data might be very important to you. How to restore the data. A simple line of command will help you.

Click on "Start" -->Run --> Type cmd and press Enter. 

Here I assume your pendrive drive letter as G: 

Enter this command. 

attrib -h -r -s /s /d g:\*.* --> Press Enter 


Note: Replace your drive letter with g


------------------------
This will surely work for you as it work for me

Conducting of LDCE for promotion of the Cadre of IP (Kerala Circle)

                        As there are no vacancy in the cadre of IP in Kerala Circle for the Inspector of Posts Examination 2013 scheduled to be held on 7th and 8th September 2013,Competent Authority has decided that the above said examination will not be conducted in the Circle.

SB Order 2013 upto June 2013

SB Order No	Description	Download Link
1	Amendment in Rule 4A of Post Office Savings Account Rules 1981 thereby allowing deposits other than wages under MGNREGA into worker wages account	Download
2	Enhancement of limit for verification of withdrawals from Savings account made at Extra departmental/ SUB/ Branch office  and Single handed Post offices reg	Download
3	Identification of PPF accounts  and admissibility of interest in such accounts reg:	Download
4	Revision in interest in small savings account reg:	Download
5	Change of Mode of dispatch of list of outstation cheques   along with cheque for clearance from registered to Insured	Download
6	Acceptance of business from SAS agent reg:	Download
7	Admissiblity of commission on deposit  in POTD accounts to GDSBPM	Download
8	Reduction in preservation periods  of records under prevention of Money Laundering act 2002- reg:	Download
9	Introduction of “ Basic savings account” under Post office savings  account rule 1981 to facilitate opening of Zero balance accounts by beneficiaries of any Govt  welfare scheme reg:	Download

Enhancement of limit for verification of withdrwal from Savings Account made at Extra Departmental Sub/Branch Post offices and Single handed Post offices reg:

Download

Clarification regarding the eligibility of junior/senor RDs/serving in central /state govt. hospital to avil PLI product

Clarification regarding the eligibility of junior/senor RDs/serving in central /state govt. hospital to avil PLI product

DOP Browser 2.0

DOP browser 2.0 developed by POtools.blogspot.in is a gool tool to be used in Divisional/Regional and Postal offices to monitor Post office sites

Source: Potools.blogspot.in

windows system32 config system is corrupt in Windows Server 2003

1. Insert your Windows Server 2003 CD and reboot from the CD drive
[To boot from CD, go to BIOS Setup option on startup and select your CD/DVD drive as the first boot drive, save the present settings and exit]
Your computer will reboot & will boot from Windows Server 2003
2. Press ‘R’ when offered the option of using the Windows Recovery Console
Recovery Console will prompt at the command prompt type the following:
C:\WINDOWS >cd system32\
this changes the current directory to C:\Windows\System32
ren config configold
This renames the config folder to configold
mkdir config
this makes a new directory called config
cd config
changes the current directory to c:\Windows\System32\Config
then type the following lines pressing enter after each one
copy c:\windows\repair\system
copy c:\windows\repair\software
copy c:\windows\repair\sam
copy c:\windows\repair\security
copy c:windows\repair\default
after each line it should say:
1 file copied
type: exit
Now Server will reboot

[To boot from Hard Drive, go to BIOS Setup option on startup and select your Hard drive as the first boot drive, save the present settings and exit]

Change of Holiday on account of Milad-Un-Nabi (Kerala circle only)

            

                      The closed holiday on account of Milad-Un-Nabi or Id-E-Milad (Birthday of Prophet Mohammed) will be observed on 24.01.2013 (Thursday) instead of 25.01.2013 (Friday) in Kerala Postal Circle.

Standard operating Procedures:

     The standard operating Procedures of eMO,IFS MO,eVPP, MNREGS, NPS and COD are attached here with as many of the viewers asked for it

• MNREGS                       https://www.box.com/files/0/f/0/1/f_5701887198
• e-MO                               https://www.box.com/files/0/f/0/1/f_5701884060
• iFS                                  https://www.box.com/files/0/f/0/1/f_5701911594
• NPS                                  https://www.box.com/files/0/f/0/1/f_5701897562
• Speed Post-COD          https://www.box.com/files/0/f/0/1/f_5701922766
• eVPP                               https://www.box.com/files/0/f/0/1/f_5701899742

Standard Operating Procedure:payment of Wages Under MNREGS

Here is the standard operating Procedure to treat Wages under MNREGS

Vista error: “The specified print monitor is unknown”

While installing network printer in Vista if you come across following error

User Access Control (UAC) is disabled, you cannot install print drivers from a remote server. To the solution is to re-enable UAC

For enabling UAC


Control Panel--Click on User accounts--Then tick on UAC

or
in Run type the command

C:\Windows\System32\cmd.exe /k %windir%\System32\reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 1 /f


For disabling UAC 

C:\Windows\System32\cmd.exe /k %windir%\System32\reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 0 /f

Error in update 5

After updating MM7 with update 5, while running eMO client an error as shown "[701] Login faild for user 'nrega' "

Click here for Solution

Speed net Upgradation not reflected in Speednet MIS site

Even after upgrading speednet patch 6 the same is not reflected in Speednet MIS site. You can use the following EXL . The same can be downloaded from here

 

update 5 to Meghdoot 7.0

Update 5.0 to Meghdoot 7.0 released on 31.12.2012. The update indent for NREGS module. the same can be downloaded from following ftp address ftp://ftp.ptcinfo.org/Meghdoot7/Updates/Update-5(NREG)/ 

Read me

Upgradation procedure for NREG in c/w eMO Client

• ·        Ensure that your emo database is already upgraded with version 7 update 3. 
•      In offices having Sanchay post latest version installed and NREGAEMO database is available, please upgrade the same with NREGAEMO script provided.
• ·        Stop eMO client exe if running. Replace existing eMOclient.exe available in eMO client installation path with new eMO client exe provided in upgradation.
• ·        For the first time, when you run new eMO client exe, it will prompt to enter Sanchay post server details 

• ·        Enter Sanchay post server name if Sanchay Post server is available in that office else select not available and click on OK.

• Your system will now be ready for receipt of Sanchay post related files through eMO client from central server if server details were provided.

• For adding Sanchay post codes, option is available in Divisional administrator web login of eMO. Reports regarding NREG are available under Reports menu.

• Please select the eMO Office Name and update Sanchay post code used for that PO.